Glamorca Carbon Block

£12.99

The Glamorca carbon block filter removes impurities such as chlorine, organic contaminants, pesticides and other chemicals. It is for use with the Glamorca RODI machine. Change it every 6 months along with the Glamorca activated carbon filter to best protect the RODI machine’s membrane and to achieve top quality water!

Very easy to quickly change, especially when compared to traditional RO filters.

3 in stock

Glamorca carbon block filter is easy and quick to change for high quality RODI water of 0ppm TDS.
Glamorca activated carbon filter by maxspect for 0TDS RODI water quality
Maxspect Glamorca DI filter easy to change. This filter allows deionisation or deionization of the water to get your RODI to 0TDS
Quick change Glamorca sediment filter for the Maxspect RODI unit twist into place
This item: Glamorca Carbon Block

3 in stock

1 × Glamorca Activated Carbon

2 in stock

1 × Glamorca DI (Deionisation)

6 in stock

1 × Glamorca Sediment Filter

2 in stock

Description

The Glamorca carbon block filter removes impurities such as chlorine, organic contaminants, pesticides and other chemicals. It eliminates or reduces unwanted tastes, colour and odour of water and protects the RO membrane. These filters are very easy to change, especially when compared to traditional RO filters.

How often should I be changing Glamorca carbon block filters?

For best results change the Glamorca carbon block filter along with the Glamorca activated carbon filter every 6 months.

The Glamorca machine has a timer built in, so it should remind you when it’s time to change the filter by highlighting one of the five LED lights on the front of the unit.

Which LEDs represent which quick change Glamorca filter?

  1. = 5 μ micron sediment filter – change every 4 months
  2. = activated carbon filter – change every 6 months
  3. = carbon block filter – change every 6 months
  4. = RO membrane – change every 12 months
  5. = DI (deionisation) filter – change whenever the TDS is higher than 0ppm

RODI units and ICP testing

If you are changing your filters as recommended, you should have no trouble with water quality. It is good to know that the Glamorca machine constantly monitors the TDS of your water as well!

However, if you get behind with the filter changes, and want to double check RODI water quality, you can always use a ICP/OES test kit. Simply take a sample of the RODI water straight from the clean water pipe and send it off to be lab tested in one of the easy to use Reef Zlements ICP test kits. You will receive an extremely accurate read out of RODI water analysis.

Other notes about Glamorca carbon block filter:

Do not use where the water is microbiologically unsafe or of an unknown quality. It is essential that operation, maintenance and filter replacement requirements be carried out as scheduled so that the system can perform to its optimum ability.

Glamorca RODI water filters are only for use to make water for aquariums.

Flow rate: 1 GPM

Min./max. temperature: 5 – 52 °C

Min./max. pressure: 2 – 5.5 bar